3-20Psi Digital Dial Gauge Kit With English / Spanish Language

Digital Dial Gauge Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump and Vacuum Tester Gauge SG-HS2217

Vacuum/Pressure Gauge Kit SG-HS2217

This Vacuum and Fuel Pressure Tester Kit is a great way to fine-tune carburetion and timing for peak performance and maximum fuel economy.

Use to test fuel pump pressure, mechanical condition of the engine, vacuum control system function, and much more.

Use to find: intake manifold leaks, blown manifold, and head gaskets, worn piston rings, burned valves, and leaking vacuum lines on conventional and computer-controlled vehicles.

Technical Data:

1. Basic Accuracy: +/- 3%
2. Range Of Measurement:3~20psi,30inhg
3. Working Condition:-20℃~60℃,Below 95%Rh, Normal Atmosphere
4. Storage And Transportation Conditions:-30℃—70℃
5. Battery Specification:6f22 9v Laminated Cell
6. The Minimum Resolution Of Light Band: 3.3 Psi Major Light Band Graduations.
7. The Corresponding Time Of The Light Band ≤ 1s.

Features

• Main screen: Showing the current pressure value.
• Test mode display symbols: When showing“Full Scale 20 PSI” means the tester is in pressure test mode when showing“Full-Scale 30inHgVAC” means the tester is in the Vacuum test mode.
• Light band: It changes as the pressure changes, with the positive pressure it moves from left to right and the vacuum pressure it moves from right to left.
• ON-OFF: The button of power on or power OFF. In the absence of any operation, about 6 minutes automatic shutdown.
• The Low-voltage symbol.
• The pressure unit of the current state.
• CLEAR/LIGHT: The initial value will be reset by pressing the button briefly. Keep pressing the button for 3 seconds the backlight will be turned off or on.
• UNIT/MODE: The unit of measurement will change by pressing the button briefly: PSI, kPa,bar,inHg,cmHg.Keep pressing the button for 3 seconds, it will show“Full Scale 20 PSI” then keep pressing the button for other 3 seconds,it will show“Full-Scale 30inHgVAC”